quoteopk.blogg.se - Windows 10 installer usb

Then you can use a flash drive, MBR partition, FAT32 formatted, marked as active, and just copy all the files from the ISO file to it without having to mess with splitting any install.wim file. Download the ISO file with Microsoft's Media Creation Tool. Just let Microsoft's Media Creation Tool create the USB flash drive for you (preferred) orĢ. Why are you messing with install.wim at all? Either:ġ.

Downloaded the ISO, copied everything except the sources folder into the USB, then split the "install.wim" 6.07 GB file into 2 parts using "WIMB," put those 2 files "Install.swm" (4.03 GB) and "Install2.swm" (around 2 GB) into the sources folder in the USB.That is not what was recommended in this thread. But I did all the stuff that was recommended. If the USB installer is screwed up, that's on me. (See Figure 8 for an example.Yep, that's what Step 15 says to do and that's what I did.

Use the following command to load the appropriate driver to the computer and press Enter.

inf file that is needed for the device being installed in order to load Windows, as shown in Figure 7. See ( Figure 6 ).įigure 6: Navigating of the file system to locate the driver file location Use dir as necessary to see the contents of each folder.

Use the CD command to navigate through the folders to the *.inf driver location.

The correct drive is usually the D:, E:, or F: drive.įigure 5: Navigating of the file system to locate the driver file location

Browse to the drive that contains the needed drivers using the " dir" command to view the drive contents, as shown in Figure 5.

)įigure 4: Selecting the Command Prompt Option

Select Troubleshoot → Advanced Options → Command Prompt.

Boot to the respective Dell Windows 11 or Windows 10 media and select your computer and keyboard languages to get to the Home screen.

NOTE: The images below use the IRST driver as an example.